Recent updates on guar gum derivatives in colon specific drug delivery.

Colon specific delivery of therapeutics have gained much attention of pharmaceutical researchers in the recent past. Colonic specific targeting of drugs is used not only for facilitating absorption of protein or peptide drugs, but also localization of therapeutic agents in colon to treat several colonic disorders. Among various biopolymers, guar gum (GG) exhibits pH dependent swelling, which allows colon specific release of drug. GG also shows microbial degradation in the colonic environment which makes it a suitable excipient for developing colon specific drug delivery systems. The uncontrolled swelling and hydration of GG can be controlled by structural modification or by grafting with another polymeric moiety. Several graft copolymerized guar gum derivatives are investigated for colon targeting of drugs. The efficacy of various guar gum derivatives are evaluated for colon specific delivery of drugs. The reviewed literature evidenced the potentiality of guar gum in localizing drugs in the colonic environment. This review focuses on the synthesis of several guar gum derivatives and their application in developing various colon specific drug delivery systems including matrix tablets, coated formulations, nano or microparticulate delivery systems and hydrogels.

Isolation, structural, biological activity and application of Gleditsia species seeds galactomannans.

Gleditsia fruits have been known as a valuable traditional Chinese herb for tens of centuries. Previous studies showed that the galactomannans are considered as one of the major bioactive components in Gleditsia fruits seeds (GSGs). Here, we systematically review the major studies of GSGs in recent years to promote their better understanding. The extraction methods of GSGs mainly include hot water extraction, microwave-assisted extraction, ultrasonic extraction, acid extraction, and alkali extraction. The analysis revealed that GGSs exhibited in the form of semi-flexible coils, and its molecular weight ranged from 0.018 × 103 to 2.778 × 103 KDa. GSGs are composed of various monosaccharide constituents such as mannose, galactose, glucose, and arabinose. In terms of pharmacological effects, GSGs exhibit excellent activity in antioxidation, hypoglycemic, hypolipidemic, anti-inflammation. Moreover, GSGs have excellent bioavailability, biocompatibility, and biodegradability, which make them used in food additives, food packaging, pharmaceutical field, industry and agriculture. Of cause, the shortcomings of the current research and the potential development and future research are also highlighted. We believe our work provides comprehensive knowledge and underpinnings for further research and development of GSGs.

Structural characterization of a galactoglucomannan with anti-neuroinflammatory activity from Ganoderma lucidum.

According to traditional Chinese medicine theory, Ganoderma lucidum (G. lucidum) presents certain effects for nourishing nerves and calming the mind. G. lucidum polysaccharides (GLPs) have various biological activities; however, the structural characterization and the structure-activity relationship in anti-neuroinflammation of GLPs needs to be further investigated. In this work, the crude polysaccharide GL70 exhibited a remarkable impact on enhancing the spatial learning and memory function, as well as reducing the anxiety symptoms of the lipopolysaccharide (LPS)-induced rat model of Alzheimer's disease (AD). A galactoglucomannan (GLP70-1-2) was isolated from GL70, and characterized by monosaccharide composition, partial acid hydrolysis, methylation, and NMR analysis. The backbone of GLP70-1-2 was →6)-α-D-glcp-(1 â†’ 6)-ß-D-galp-(1 â†’ [6)-ß-D-manp-(1]3 â†’ 4)-α-D-Glcp-(1 â†’ 6)-α-D-glcp-(1 â†’ 2)-ß-D-galp-(1 â†’ [4)-α-D-glcp-(1 â†’ 6)-ß-D-manp-(1 â†’ 2)-ß-D-galp-(1]2 â†’ 6)-ß-D-glcp-(1 â†’ 6)-ß-D-glcp-(1→ with two side chains attached to O-4 of →6)-ß-D-galp-(1→ and O-3 of →6)-ß-D-glcp-(1→, respectively. In addition, GLP70-1-2 exhibited remarkable efficacy in decreasing the level of pro-inflammatory factors in LPS-activated BV2 cells through the TLR4/MyD88/NF-κB pathway. Collectively, GLP70-1-2 exhibited significant anti-neuroinflammatory activity and may have the potential for developing as a drug for AD.

Thermophilic ß-mannanases from bacteria: production, resources, structural features and bioengineering strategies.

ß-mannanases are pivotal enzymes that cleave the mannan backbone to release short chain mannooligosaccharides, which have tremendous biotechnological applications including food/feed, prebiotics and biofuel production. Due to the high temperature conditions in many industrial applications, thermophilic mannanases seem to have great potential to overcome the thermal impediments. Thus, structural analysis of thermostable ß-mannanases is extremely important, as it could open up new avenues for genetic engineering, and protein engineering of these enzymes with enhanced properties and catalytic efficiencies. Under this scope, the present review provides a state-of-the-art discussion on the thermophilic ß-mannanases from bacterial origin, their production, engineering and structural characterization. It covers broad insights into various molecular biology techniques such as gene mutagenesis, heterologous gene expression, and protein engineering, that are employed to improve the catalytic efficiency and thermostability of bacterial mannanases for potential industrial applications. Further, the bottlenecks associated with mannanase production and process optimization are also discussed. Finally, future research related to bioengineering of mannanases with novel protein expression systems for commercial applications are also elaborated.

Addition of konjac glucomannan improves spraying efficiency on fruits and vegetables: Effect of surface hydrophilicity and molecular weight.

Biomacromolecules have attracted interest as spraying additives due to their degradability, renewability, and non-toxicity. However, microscopic mechanism of the biomacromolecules regulating the droplet behavior on fruits and vegetables is still unclear. In this study, konjac glucomannan (KGM) was used to improve the spraying efficiency and the fresh-keeping performance of tea polyphenols solution. KGM increased effective spreading ratio on hydrophilic surfaces and retention ratio of the main droplet on hydrophobic surfaces, thus improving spraying efficiency. Computational fluid dynamics and Brown dynamics simulations were implemented to investigate KGM behaviors during droplets colliding on hydrophilic and hydrophobic surfaces. Most KGM molecules extended and then collapsed in gradually weakened shear flow. Meanwhile, on the hydrophobic surface, most KGM molecules were continuously stretched by the unstable flow field. As the KGM extended, the kinetic energy of droplets converted into elastic energy stored in the KGM, promoting the stability of droplets on target surfaces and improving the spraying efficiency. The KGM molecular weight of 3.8 × 105 Da was optimal from the point of energy storage density. This study provides more understanding of the mechanism of biomacromolecules on spraying efficiency and guidance to develop biomass spraying additives for fruit and vegetable preservation.

Synthesis of a unique mannose α-1-phosphate side chain moiety found in Candida auris cell wall mannan.

Candida auris is an emerging fungal pathogen that has become a world-wide public health threat. While there have been numerous studies into the nature, composition and structure of the cell wall of Candida albicans and other Candida species, much less is known about the C. auris cell wall. We have shown that C. auris cell wall mannan contains a unique phosphomannan structure which distinguishes C. auris mannan from the mannans found in other fungal species. Specifically, C. auris exhibits two unique acid-labile mannose α-1-phosphate (Manα1PO4) sidechains that are absent in other fungal mannans and fungal pathogens. This unique mannan structural feature presents an opportunity for the development of vaccines, therapeutics, diagnostic tools and/or research reagents that target C. auris. Herein, we describe the successful synthesis and structural characterization of a Manα1PO4-containing disaccharide moiety that mimics the phosphomannan found in C. auris. Additionally, we present evidence that the synthetic Manα1PO4 glycomimetic is specifically recognized and bound by cell surface pattern recognition receptors, i.e. rhDectin-2, rhMannose receptor and rhMincle, that are known to play important roles in the innate immune response to C. auris as well as other fungal pathogens. The synthesis of the Manα1PO4 glycomimetic may represent an important starting point in the development of vaccines, therapeutics, diagnostics and research reagents which target a number of C. auris clinical strains. In addition, these data provide new insights and understanding into the structural biology of this unique fungal pathogen.

Synthesis of galactomannan fragments to help NMR assignment of polysaccharides extracted from lichens.

The synthesis of six model trisaccharides representative of galactomannans produced by lichens was performed through stereoselective glycosylation. These standards include linear and branched galactomannans bearing either galactofuranosyl or galactopyranosyl entities. The complete assignment of 1H and 13C signals for both forms of synthetically reduced oligosaccharides was performed. The resulting NMR data were used to quickly demonstrate the structural characteristics of minor polysaccharides within different extracts of three representative lichens.

Development of guar gum reinforced calcium magnesium phosphate-based bone biocement.

This study aims at developing a calcium magnesium phosphate-based bone biocement that combines a natural polymer and regenerative properties of bone bonding materials. The formulation of this biocement consists of oxidized guar gum, polydopamine, and calcium magnesium phosphate. The oxidized guar gum is easily soluble in water and has a slightly basic pH, unlike unmodified guar gum, thus allowing a homogenous paste to form in the alkaline environment of calcium magnesium phosphate. Three different oxidized degrees of guar gum were made, and the impact on the biocement properties was studied. The modified guar gum-reinforced biocement (OGG C2) displayed higher mechanical strength and lower degradation rates than OGG B1 and OGG A0. Furthermore, samples with polydopamine exhibited better results, thus, improving the already reinforced biocement. Morphological studies of the biocement displayed a highly porous structure with porosity varying among biocement containing different oxidized guar gum and polydopamine levels.

Carboxymethyl hydroxypropyl guar gum physicochemical properties in dilute aqueous media.

We investigate carboxymethyl hydroxypropyl guar gum (CMHPG) solution properties in water and NaCl, KCl, and CaCl2 aqueous solutions. The Huggins, Kraemer, and Rao models were applied by fitting specific and relative viscosity of CMHPG/water and CMHPG/salt/water to determine the intrinsic viscosity [η]. The Rao models yielded better results (R2 = 0.779-0.999) than Huggins and Kraemer equations. [η] decreased up to 84% in salt solution over the range 0.9-100 mM compared to water. Salt effects screened the CMHPG charged side groups chains leading to a compacted structure. In 0.9 mM NaCl(aq), the hydrodynamic coil radius (Rcoil) was 28% smaller and 45% smaller in 100 mM NaCl solution relative to water. Similar decreases were seen in KCl and CaCl2 solutions. KCl and CaCl2 were more effective than NaCl. CMHPG is salt-tolerant and shows comparatively less viscosity change than native guar gum, with modest reduced viscosity increases with CMHPG dilution at all salt concentrations. The electrostatic interactions were effective up to 100 mM salt. The activation energy of viscous flow for CMHPG solutions was computed and compared to measured xanthan gum and several literature values. These data show that the barrier to CMHPG flow is higher than for xanthan gum.

Extraction, structural characterization and immunoactivity of glucomannan type polysaccahrides from Lilium brownii var. viridulum Baker.

Homogeneous polysaccharide (LBP) was extracted and purified from the bulblets of Lilium brownii var. viridulum Baker with a molecular weight of 312 kDa. The monosaccharides are composed of mannose and glucose, and the corresponding molar ratios are 0.582 and 0.418, respectively. FT-IR, LC-MS, NMR, GC-MS and HPAEC were used to analyze the functional groups, glycosidic linkages and chemical structure of LBP, which was a 1-4-linked glucomannan and contained a dodecasaccharide repeating units of →4)-ß-D-Manp-(1 â†’ 4)-ß-D-Manp-(1 â†’ 4)-ß-D-Manp-(1 â†’ 4)-ß-D-Glcp-(1 â†’ 4)-ß-D-Manp-(1 â†’ 4)-ß-D-Manp-(1 â†’ 4)-ß-D-Glcp-(1 â†’ 4)-α-D-Glcp-(1 â†’ 4)-ß-D-Glcp-(1 â†’ 4)-ß-D-Glcp-(1 â†’ 4)-ß-D-Manp-(1 â†’ 4)-ß-D-Manp-(1 â†’ . In vitro experimental results showed that LBP had noble biocompatibility, and a low dose of 5 µg/mL LBP significantly up-regulated the mRNA expression of TNF-α, iNOS, IL-6, IL-1ß and Toll-like receptors family (TLRs) in RAW 264.7 cells. In conclusion, LBP played an important role in immunomodulation, and further studies on the specific immunomodulatory mechanisms of LBP on RAW 264.7 cells are still needed.

Polysaccharide from Clitocybe squamulosa: Gel-forming properties and its compound effect with food thickener.

To study the gel-forming properties of polysaccharide from the fruiting body of Clitocybe squamulosa (CSFP) and its degradation product (UH-CSFP), the changes in steady-state and dynamic rheological properties of CSFP and UH-CSFP under different conditions (polysaccharide mass fraction, temperature, pH, and salt ion concentration) were studied. Polysaccharides with good gel-forming properties were selected and mixed with common edible thickeners (gelatin, guar gum, and locust bean gum), after which the properties of the composite gel were assessed. The steady-state rheological results showed that CSFP and UH-CSFP were pseudoplastic fluids, their apparent viscosity decreased with increasing temperature, the viscosity was greatest when the pH was 7. The addition of Na+ and Ca2+ could increase the viscosity, and the viscosity of UH-CSFP was lower than that of CSFP at the same mass fraction. The results of dynamic rheology indicated that G´ and G´´ of CSFP and UH-CSFP increased with increasing mass fraction, pH, and ion concentration (0.01 M to 1 M), and G´´ was always smaller than G´ indicating weak gel behavior. The thixotropy-related experimental results showed that the thixotropy ring area of CSFP and UH-CSFP increased with increasing mass fraction, the ring area of CSFP was larger than that of UH-CSFP, and the gel strength of CSFP was greater than that of UH-CSFP. The results of CSFP and three types of edible gels showed that the composite gels were pseudoplastic fluids, and their apparent viscosity was ranked (in descending order) as follows: guar bean gum, locust bean gum, and gelatin. The addition of CSFP improved the gel-forming properties of guar gum but did not significantly improve the gel properties of locust bean gum and gelatin. This study provides a theoretical basis for the selection of processing methods and the application of polysaccharides.

Recrystallized resistant starch by encapsulation with konjac glucomannan: Structural changes, digestibility, and its effect on glucose response and short-term satiety in mice.

The effects of the structure and digestibility of konjac glucomannan (KGM)-recrystallized resistant starch complex (KRS3) on the glycemic response and short-term satiety in mice were investigated. KRS3 samples were prepared by recrystallized debranched starch (RS3) at 50 °C, and then combined with KGM. The RS3 and KRS3 samples displayed an A-type pattern and maintained peak temperature values above 110 °C. With an increase in KGM, the swelling power and apparent viscosity of KRS3 increased. The results of in vitro and in vivo digestion revealed that KRS3 with a resistant starch content ranging from 69.4 % to 78.8 % could effectively maintain postprandial blood glucose levels. KRS3, particularly with 0.5 % KGM, slowed gastric emptying of mice from 82.7 % to 36.6 % and intestinal propulsion rate from 60.9 % to 35.3 %, resulting in strong satiety. RS3 combined with KGM could serve as a new approach to develop RS3 based foods with low glycemic responses and high-satiety.

Maternal supplementation with konjac glucomannan improves maternal microbiota for healthier offspring during lactation.

BACKGROUND: The maternal diet during gestation and lactation affects the health of the offspring. Konjac glucomannan (KGM) is a significantly functional polysaccharide in food research, possessing both antioxidant and prebiotic properties. However, the mechanisms of how KGM regulates maternal nutrition remain insufficient and limited. This study aimed to investigate maternal supplementation with KGM during late gestation and lactation to benefit both maternal and offspring generations. RESULTS: Our findings indicate that KGM improves serum low density lipoprotein cholesterol (LDL-C) and antioxidant capacity. Furthermore, the KGM group displayed a significant increase in the feed intake-related hormones neuropeptide tyrosine (NPY), Ghrelin, and adenosine monophosphate-activated kinase (AMPK) levels. KGM modified the relative abundance of Clostridium, Candidatus Saccharimonas, unclassified Firmicutes, and unclassified Christensenellaceae in sow feces. Acetate, valerate, and isobutyrate were also improved in the feces of sows in the KGM group. These are potential target bacterial genera that may modulate the host's health. Furthermore, Spearman's correlation analysis unveiled significant correlations between the altered bacteria genus and feed intake-related hormones. More importantly, KGM reduced interleukin-6 (IL-6) levels in milk, further improved IL-10 levels, and reduced zonulin levels in the serum of offspring. CONCLUSION: In conclusion, maternal dietary supplementation with KGM during late gestation and lactation improves maternal nutritional status by modifying maternal microbial and increasing lactation feed intake, which benefits the anti-inflammatory capacity of the offspring serum. © 2024 Society of Chemical Industry.

Study on structure and properties of galactomannan and enzyme changes during fenugreek seeds germination.

Fenugreek (Trigonella foenum-graecum L) galactomannan play an important role in the food and pharmaceutical sectors due to its attractive physicochemical properties. In this study, the changes of structure, properties and biological activity of fenugreek galactomannan (FG) during germination are analyzed by the activity and mechanism of endogenous enzymes (α-D-galactosidase and ß-D-mannanase). The enzymes generally increased during germination and synergistically altered the structure of GM by cutting down the main chains and removing partial side residues. The mannose to galactose ratio (M/G) increased from 1.11 to 1.59, which is accompanied by a drastic decrease in molecular weight from 3.606 × 106 to 0.832 × 106 g/mol, and the drop of viscosity from 0.27 to 0.06 Pa·sn. The degraded macromolecules are attributed to the increase in solubility (from 64.55 % to 88.62 %). In terms of antioxidation and antidiabetic ability, germinated fenugreek galactomannan has the ability to scavenge 67.17 % ABTS free radicals and inhibit 86.89 % α-glucosidase. This galactomannan with low molecular weight and excellent biological activity precisely satisfies the current demands of pharmaceutical reagents and food industry. Seeds germination holds promise as a means of industrial scale production of low molecular weight galactomannans.

Tailoring the oral sensation and digestive behavior of konjac glucomannan-gelatin binary hydrogel based bigel: Effects of composition and ratio.

In the food industry, there is a growing demand for bigels that offer both adaptable oral sensations and versatile delivery properties. Herein, we developed bigels using a binary hydrogel of konjac glucomannan (KGM) and gelatin (G) combined with a stearic acid oleogel. We closely examined how the oleogel/hydrogel volume ratio (φ) and the KGM/G mass ratio (γ) influenced various characteristics of the bigels, including their microstructure, texture, rheological properties, thermal-sensitivity, oral tribology, digestive stability, and nutraceutical delivery efficiency. A noteworthy observation was the structural evolution of the bigels with increasing φ values: transitioning from oleogel-in-hydrogel to a bicontinuous structure, and eventually to hydrogel-in-oleogel. Lower γ values yielded a softer, thermally-responsive bigel, whereas higher γ values imparted enhanced viscosity, stickiness, and spreadability to the bigel. Oral tribology assessments demonstrated that φ primarily influenced the friction sensations at lower chewing intensities. In contrast, γ played a significant role in augmenting oral friction perceptions during more intense chewing. Additionally, φ dictated the controlled release and bioaccessibility of curcumin, while γ determined digestive stability. This study provides valuable insights, emphasizing that through meticulous selection and adjustment of the hydrogel matrix composition, bigels can be custom-fabricated to achieve specific oral sensations and regulated digestive behaviors.

Investigation of the effect and mechanism of nanocellulose on soy protein isolate- konjac glucomannan composite hydrogel system.

To enrich the application of nanocomposite hydrogels, we introduced two types of nanocellulose (CNC, cellulose nanocrystals; CNF, cellulose nanofibers) into the soy protein isolate(SPI)- konjac glucomannan (KGM) composite hydrogel system, respectively. The similarities and differences between the two types of nanocellulose as textural improvers of composite gels were successfully explored, and a model was developed to elaborate their interaction mechanisms. Appropriate levels of CNC (1.0 %) and CNF (0.75 %) prolonged SPI denaturation within the system, exposed more buried functional groups, improved molecular interactions, and strengthened the honeycomb structural skeleton formed by KGM. The addition of CNC resulted in greater gel strength (SKC1 2708.53 g vs. Control 810.35 g), while the addition of CNF improved the elasticity (SKF0.75 1940.24 g vs. Control 405.34 g). This was mainly attributed to the reinforcement of the honeycomb-structured, water binding and trapping, and the synergistic effect of covalent (disulfide bonds) and non-covalent interactions (hydrogen bonds, ionic bonds) within the gel network. However, the balance and interactions between proteins and polysaccharides were disrupted in the composite system with excessive CNF addition (≥0.75 %), which broken the stability of the honeycomb-like structure. We expect this study will draw attention on potential applications of CNC and CNF in protein-polysaccharide binary systems and facilitate the creation of novel, superior, mechanically strength-regulated nanofiber composite gels.

Applications of guar gum polysaccharide for pharmaceutical drug delivery: A review.

Bio-based materials are rapidly replacing synthetic materials owing to their significant biomedical applications, easy availability, nontoxicity, biodegradability and biocompatibility. Guar gum (GG) is a plant-derived biocompatible and biodegradable polymeric compound found abundantly in nature. It is a non-ionic, hydrophilic carbohydrate and is a cost-effective hydrocolloid polysaccharide considered as a wonderful representative of the new generation of plant gums. Various composites of guar gum with other polymers have been reported in last few decades and they are extensively used in different industries like food, textile, mining, petrochemical, paper and explosives etc. Easy availability, non-toxicity, eco-friendly and biodegradable nature of GG has made it ideal candidate for for drug delivery (DD) applications. GG based hydrogels, films, scaffolds and nanoparticles have been explored widely for their DD applications. These non-toxic DD carriers can be used for targeted drug delivery. This review article directs the current efforts and improvements on GG and GG-based materials to be used in DD.

Effects of konjac glucomannan as a freeze-denaturation inhibitor or binder on the physiochemical properties of heat-induced gel of freeze-dried duck blood.

During freeze-drying, the degradation or eutectic melting of duck blood proteins can reduce the quality of duck blood gels. However, the interaction between proteins and polysaccharides during drying can improve protein-based gel quality. Therefore, here, we investigated the physicochemical properties of heat-induced gels of freeze-dried duck blood (FDB) and FDB with different proportions of the polysaccharide konjac glucomannan (KG), which serves as a freeze-denaturation inhibitor agent (FDA) or binder (BG). The pH and water-holding capacity (WHC) of FDB + KG gels were higher than those of FDB gel without KG (control). Especially, the WHC increased from 11.00% for control to 55.65% for FDB gel with 1% KG as a BG. Consequently, cooking loss and texture parameters of FDB + KG gels decreased. The hardness of control was 2.14 kg, which significantly reduced to 0.12-0.87 kg with KG addition. The highest carbonyl content was observed in control gel, and the thiobarbituric acid reactive substance content was reduced by the addition of 1% KG as an FDA (T1) or 0.8% KG as an FDA with 0.2% KG as a BG (T2) (p < 0.05). These changes might be induced by the alteration of tertiary structure and thermodynamic stability of gels. In conclusion, 1% KG can be used as an FDA to improve the quality and physicochemical properties of heat-induced gels of FDB. Optimized FDB gels with KG can be used as an innovative food ingredient to fortify nutrition and develop special dietary purposes.

Effect and characterization of konjac glucomannan on xanthan gum/κ-carrageenan/agar system.

A mixed polysaccharide system is an important strategy to improve the performance of a single polysaccharide. Herein, quaternary polysaccharide gels were prepared by konjac glucomannan (KGM), xanthan gum (XG), κ-carrageenan (κ-CA), and agar (AR). The effects of KGM were evaluated by combining water holding capacity (WHC), rheological analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and texture profile analysis (TPA). More KGM gradually increased the springiness of the compounded gels. WHC increased and then decreased with the addition of KGM, performing best at KGM4 (KGM: κ-CA:XG:AR = 2:2:1:2). Rheological analysis showed that the compounded gels exhibited a pseudoplastic characteristic of shear thinning, KGM endowed the gel with a stronger shear thinning behavior and improved the solid-like nature of the gels at high temperatures. The thermal stability of the composite gel was improved by the participation of KGM. FTIR analysis showed that the interactions were mainly related to intermolecular hydrogen bonds and acetyl groups. The microscopic morphology of KGM4 was significantly continuous, smooth, and compact, exhibiting the best practical performance and taking the maximum advantage.

Physical stability, microstructure and antimicrobial properties of konjac glucomannan coatings enriched with Litsea cubeba essential oil nanoemulsion and its effect on citruses preservation.

This study purposed to develop konjac glucomannan (KGM) based antimicrobial coatings containing Litsea cubeba essential oil nanoemulsion (LNE) for citruses preservation. Physical stability, rheological, structural and antimicrobial properties of the coating solutions were investigated, along with the release characteristics of Litsea cubeba essential oil (LCO). Results showed that the coating solutions displayed shear thinning behavior. The oil droplets were distributed homogeneously in KGM phase with good stability. The coating structure became loose with increasing LNE content due to LNE interfering with molecular interactions and entanglement of KGM. The coating solutions showed stronger antibacterial activity against Escherichia coli than against Staphylococcus aureus and were effective in inhibiting the growth of Penicillium italicum on citrus surfaces. KGM-LNE 10 negatively affected citruses due to phytotoxicity caused by high levels of LCO. LCO was released slowly and continuously from the coatings, and its release was faster in deionized water than in an ethanol-water solution. KGM-LNE 2.5 coated citruses had the least weight loss, the greatest hardness, and kept the minimum changes in total soluble solids, total acid and vitamin C content, implying that KGM-LNE 2.5 best maintained the quality of citruses. The findings suggest that KGM-based coatings containing LNE have high potential for citruses preservation.